Filter
Top Products
Configuration Commands
161
IGMP filter definition
The following table describes the IGMP Filter Definition commands.
Table 143 IGMP Filter Definition commands
Command Description
ip igmp profile <1-16> range <IP
multicast address> <IP multicast
address>
Configures the range of IP multicast addresses for this filter.
Enter the first IP multicast address of the ranger, followed by the
second IP multicast address of the range.
Command mode: Global configuration
ip igmp profile <1-16> action
{allow|deny}
Allows or denies multicast traffic for the IP multicast addresses
specified.
Command mode: Global configuration
ip igmp profile <1-16> enable
Enables this IGMP filter.
Command mode: Global configuration
no ip igmp profile <1-16> enable
Disables this IGMP filter.
Command mode: Global configuration
no ip igmp profile <1-16>
Deletes this filter’s parameter definitions.
Command mode: Global configuration
show ip igmp profile <1-16>
Displays the current IGMP filter.
Command mode: All except User EXEC
IGMP filtering port configuration
The following table describes the IGMP Port Filtering Configuration commands.
Table 144 IGMP Filtering Port commands
Command Description
[no] ip igmp filtering
Enables or disables IGMP Filtering on this port.
Command mode: Interface port
ip igmp profile <1-16>
Adds an IGMP filter to this port.
Command mode: Interface port
no ip igmp profile <1-16>
Removes an IGMP filter from this port.
Command mode: Interface port
show interface port {<port number>}
igmp-filtering
Displays the current IGMP filter parameters for this port.
Command mode: All except User EXEC