HP (Hewlett-Packard) 6 Personal Computer User Manual


 
2 How to Install Accessories In Your PC
Installing Mass Storage Devices
38 English
12 Remove the power supply and place it upside down on the front
drive unit.
13 Connect the power cable to the rear of each drive.
The connectors are shaped to fit one way only.
14 Replace the power supply. Then push the front drive unit fully into
the computer until the two retaining clips click into place.
15 Retrieve the universal front bezel from the PC’s chassis by opening
the two clips. (The universal front bezel for your PC can also be
ordered from any authorized HP reseller.).
16 Remove the filler bezel from the PC’s front panel and replace it with
the universal front bezel to give access to the newly installed drive.
17 Install any other accessories before replacing the cover. Reconnect
all cables and power cords.
18 Verify the new configuration by checking the HP Summary Screen.
Refer to page 44.