Filter
Top Products
3 Troubleshooting Your PC
HP Setup Program
66 English
HP Setup Program
Check your PC’s configuration when you first use the PC and each time
after you install, remove, or upgrade accessories. Follow these
instructions:
First, Turn Off Your PC
Turn on the display and then the PC. If the PC is already turned on, save
your data and exit all programs. For Windows NT 4.0 and Windows 95,
use the Shut Down command.
To Go to the HP
Summary Screen
While the Vectra logo appears on your display, press . This will take
you to the HP Summary Screen. The Summary Screen will appear for
only a short time. To retain the screen indefinitely (until you decide to
leave it), press .
To Go to the
Setup
Program
To go immediately into the Setup program while the Vectra logo
appears on your display (and bypass the Summary Screen), press
instead of .