Filter
Top Products
Removal and replacement procedures 56
Locate and download the latest ROM version from the HP website (http://www.hp.com/support).
Follow the instructions on the website to update the system ROM.
2. Power down the server (on page 27).
3. Do one of the following:
o Open or remove the tower bezel, as needed ("Tower bezel" on page 30).
o Extend the server from the rack (on page 28).
4. Remove the access panel ("Access panel" on page 31).
5. Place the tower server on its side.
6. Remove fan 5 ("Fan 5" on page 31).
7. If installed, remove the BBWC battery pack or the FBWC capacitor pack ("BBWC battery pack or
FBWC capacitor pack" on page 33).
8. Remove the air baffle ("Air baffle" on page 34).
9. Remove the heatsink ("Heatsink" on page 53).
10. Open the processor locking lever and the processor socket retaining bracket.
11. Using the processor tool, remove the processor from the system board:
a. Line up the processor tool, ensuring the locking lever graphic on the tool is oriented correctly.
b. Press in on the plastic tabs, and then place the tool on the processor.