Filter
Top Products
Removal and replacement procedures 77
9.
Apply all the grease to the top of the processor in the following pattern to ensure even distribution.
10. Install the heatsink.
11. Close the heatsink locking levers.
IMPORTANT: Install all components with the same configuration that was used on the failed
system board.
12. Install all components removed from the failed system board.
13. Connect the cables.
14. Install the air baffle.
15. If removed, install the BBWC battery pack or the FBWC capacitor pack.
16. Install fan 5.
17. Install the access panel.
18. Do one of the following:
o Close or install the tower bezel, as needed.
o Install the server in the rack.