Filter
Top Products
Removal and replacement procedures 67
3.
Remove the access panel ("Access panel" on page 31).
4. Remove fan 5 ("Fan 5" on page 31).
5. If installed, remove the BBWC battery pack or the FBWC capacitor pack ("BBWC battery pack or
FBWC capacitor pack" on page 33).
6. Remove the air baffle ("Air baffle" on page 34).
7. Remove the fan cage ("Fan cage" on page 35).
8. Extend the Systems Insight Display from the chassis.
The cages, blanks, and drives are not shown for clarity.
9. Disconnect the System Insight Display cables from the Systems Insight Display.
10. Remove the Systems Insight Display.
To replace the component, reverse the removal procedure.
Systems Insight Display cables
To remove the component:
1. Power down the server (on page 27).
2. Do one of the following:
o Open or remove the tower bezel, as needed ("Tower bezel" on page 30).
o Extend the server from the rack (on page 28).
3. Remove the access panel ("Access panel" on page 31).
4. Remove fan 5 ("Fan 5" on page 31).
5. If installed, remove the BBWC battery pack or the FBWC capacitor pack ("BBWC battery pack or
FBWC capacitor pack" on page 33).
6. Remove the air baffle ("Air baffle" on page 34).
7. Remove the fan cage ("Fan cage" on page 35).
8. Remove the Systems Insight Display ("Systems Insight Display" on page 66).