Filter
Top Products
Removal and replacement procedures 33
1.
Power down the server (on page 27).
2. Remove the server from the rack (on page 29).
3. Use a flat-head screwdriver to lift the spring tab.
4. Slide the rail forward and remove it from the server.
5. Repeat the steps above to remove the other rail.
To replace the component, reverse the removal procedure.
Large redundant fan air baffle
To remove the component:
1. Power down the server (on page 27).
2. Do one of the following:
o Open or remove the tower bezel, as needed ("Front bezel" on page 30).
o Extend the server from the rack (on page 28).
3. Remove the access panel ("Access panel" on page 31).