Filter
Top Products
Removal and replacement procedures 57
8.
Remove the DIMM.
To replace the component, reverse the removal procedure.
For DIMM configuration information, see the server user guide.
Heatsink
To remove the component:
1. Power down the server (on page 27).
2. Do one of the following:
o Open or remove the tower bezel, as needed ("Front bezel" on page 30).
o Extend the server from the rack (on page 28).
3. Place the tower server on its side.
4. Remove the access panel ("Access panel" on page 31).
5. Remove the large redundant fan air baffle, if installed ("Large redundant fan air baffle" on page 33).
6. Open the heatsink locking levers.