Filter
Top Products
3-166 Troubleshooting Analysis Guide (TAGs)
TAG 806: Prints with Dark Spots or Scratches
Error Code: 806
Possible Causes: Paper path contamination
Paper supply defects
Toner
Possible Defects: Photoconductor unit
Main charger
Fuser unit
Developer unit
Cleaner unit
1
Turn the printer off and unplug the power cord.
• Perform the every-call cleaning procedure, described in Chapter 9, “General Printer Mainte-
nance”.
• Turn the printer on.
• Run test prints.
Has the problem been resolved?
No: Continue.
Yes: Contamination was at fault. Turn to TAG 002: Check & Problem Resolution.
2
Check the voltages, as outlined in Chapter 9, “General Printer Maintenance”.
Are the voltages correct?
No: Replace the high voltage power supply unit, then turn to TAG 002: Check & Problem
Resolution.
Yes: Continue.
3
Have the photoconductor unit, main charger, fuser unit, cleaner unit, and developer
unit with new toner cartridge been replaced recently?
No: Continue.
Yes: Go to #8 in this TAG.
4
Replace the photoconductor unit and main charger.
• Run test prints.
Has the problem been resolved?
No: Reinstall the original photoconductor unit and main charger and continue.
Yes: Turn to TAG 002: Check & Problem Resolution.
5
Replace the cleaner unit.
• Run test prints.
Has the problem been resolved?
No: Reinstall the original cleaner unit and continue.
Yes: Turn to TAG 002: Check & Problem Resolution.