Filter
Top Products
HP Color Copier User’s Guide
2-7
Step 4 — Install Print Cartridges
1
Locate the print-cartridge access door on the front of the HP Color
Copier, just above the OUT tray.
2
Pull the latch on the print-cartridge access door toward you and raise it
up until it is fully extended.
3
Remove the cardboard insert from the inside of the unit.
TIP
Save the packaging materials in case you ever need to move or
ship your HP Color Copier.
The print-cartridge carriage will be in the middle of the access area. The
carriage contains two slots designed to hold one color print cartridge and
one black print cartridge. You should have received one of each type of
cartridge with your new HP Color Copier.
4
Raise both latches on the carriage.
5
Remove the color print cartridge (the thicker one) from its packaging
and, being careful to touch only the black plastic, gently remove both the
green pull tab and blue tape covering the nozzles.
CAUTION
Do not touch the gold-colored contacts.
WSGCh1.fm Page 7 Wednesday, December 23, 1998 12:25 PM