Filter
Top Products
4-8
Copying
ELC (Enhance Light Colors)
ELC enhances light-colored backgrounds in documents and improves the
appearance of very pale colors. It is turned off by default and should usually
be left off. (ELC is automatically turned on when you select Photo Mode
.)
However, turn ELC on if pale colors are copying as white.
To turn ELC on or off, do the following:
1
Press Menu until ELC appears.
2
Press the minus (–) or plus (+) button to switch between off
❍
and
on
●
.
3
Press Select/Resume to confirm your selection.
Changing Default Settings
This section explains how to change the default front-panel settings.
NOTE
To change the default language, see “Changing the Front-Panel Language” in
Chapter 2.
Creating Your Own Default Settings
If you consistently use settings on the front panel other than the default
settings, you can make those your new default settings. You can change most
settings. To create new default settings:
1
Set all options the way you want them.
2
Press Menu until Set Defaults appears.
3
Press Select/Resume to confirm your selection.
NOTE
Current settings are indicated by a solid circle
●
. Default settings have no special
indicator.
Restoring the Factory Default Settings
You can return all the front-panel settings to their factory default settings. To
do so:
1
Press the Menu button until Factory Defaults appears.
2
Press Select/Resume to confirm your selection.
WBOCh5.fm Page 8 Wednesday, December 23, 1998 2:46 PM