Filter
Top Products
2-10
Setting Up Your New HP
Color Copier
Step 5 — Connect the Power Cord
WARNING
Choose a power outlet that is easy to access. This allows you to shut off power
quickly.
Power is present in the product even if the white power button on the left side of the
unit’s front panel was used to turn the unit off. To shut off power completely,
disconnect the power cord.
For safe operation, use the power cord with a properly grounded outlet.
Use only the power supply (HP part number 0950-2880) that came with your HP
Color
Copier
. Using another adapter may be hazardous.
The HP Color Copier comes with a power supply adapter, to which an
output cord is permanently attached, and a main power cord for the
country to which it is shipped. If the plug on the main power cord does
not look familiar, contact your dealer or local HP Sales and Support
Office.
1
Plug the power supply output cord into the back of the HP Color Copier.
The power supply connector is located on the back of the unit.
2
If you have an ADF unit and the lid cord is not already attached, connect
the cord securely to the back of the HP Color Copier.
The lid connector is located on the back of the unit.
NOTE
Make sure that the cord is securely attached; otherwise, it may not work.
WSGCh1.fm Page 10 Wednesday, December 23, 1998 12:25 PM