Filter
Top Products
The following table lists possible ways you can use the tray settings to meet your printing
needs.
I want to... Follow these steps
Load both trays with the same media, and have
the printer pick media from one tray if the other
one is empty.
•
Load media in Tray 1 and Tray 2. For more
information, see Load paper.
•
Make sure tray lock is disabled.
Have both special media (such as
transparencies or letterhead) and plain paper
loaded in the trays.
•
Load special media in Tray 1 and plain
paper in Tray 2.
•
Make sure the default tray is set to Tray 2.
•
Make sure tray lock is set to Tray 1.
Load media in both trays but have the printer
pick media from a specific tray first.
•
Load media in Tray 1 and Tray 2.
•
Make sure default tray is set to the
appropriate tray.
To configure the trays
1. Make sure the printer is turned on.
2. Touch
(right arrow), touch Setup, touch Preferences, and then select Default
Tray or Tray Lock.
3. Click OK or Apply after changing the desired tray settings.
Turn on accessories in the printer driver
• To turn on accessories (Windows)
•
To turn on accessories (Mac OS X)
To turn on accessories (Windows)
1. Click Start, and then click Printers or Printers and Faxes or Devices and
Printers.
- Or -
Click Start, click Control Panel, and then double-click Printers.
2. Right-click the printer icon, and then click Properties.
3. Select the Device Settings tab. Click the accessory that you want to turn on, click
Installed from the drop-down menu, and then click OK.
To turn on accessories (Mac OS X)
Mac OS X automatically turns on all accessories in the printer driver when you install the
printer software. If you add a new accessory later, follow these steps:
1. Open the System Preferences and then select Print & Fax or Print & Scan.
2. Select the printer from list of printers, and then click Options & Supplies.
3. Click the Driver tab.
4. Select the options you want to install, and then click OK.
Chapter 1
24 Get started