Filter
Top Products
Installing File Services for Macintosh
To install File Services for Macintosh, perform the following steps:
1. Access the desk
top on the storage server.
2. Open Add or Remo
ve Programs from the Control Panel.
3. Click Add or Remove Windows Components.
4. Double-click Other Network File and Print Services.
5. Select File Se
rvices for Macintosh, and then click OK.
6. Click Next.
7. Click Finish.
Completing setup of AppleTalk protocol and shares
See the online help to complete the following set up and configurations tasks:
• To set up App leTalk protocol properties
AppleTalk shares can be set up only after AppleTalk Protocol and Fi le Services for Macintosh have
been installed on the storage ser ver.
CAUTION:
AppleTalk shares should not be created on clustered resources because data loss can occur due
to local memory use.
• To set up AppleTalk shares
• To configure AppleTalk sharing properties
• To allow client permission to an AppleTalk share
IfAppleTalkisenabledforyourserverconfiguration, specify which AppleTalk clients are granted
access to each share. Access can be granted or denied on the basis of client host name. Access
can also be granted or denied on the basis of client groups, where a client group contains one
or more client host names.
Print services for Macintosh
Macintosh clients can send print jobs to a print server or File Print Appliance (FPA) when Print Server for
Macintosh is i nstalled on the server. To the Macintosh-based client, the print ser ver or FPA appears to be
an AppleTalk printer on the network, and no reconfiguration of the client is necessary.
Installing Print Services for Macintosh
Consult the following resource for information about installing Print Services for Macintosh:
• How To: Install Print Services for Macintosh in Windows Server 2003
h
ttp://support.microsoft.com/?scid=kb; en-us;323421
PointandPrintfromMacintoshtoWindowsServer2003
Point-and-Print behavior from Macintosh clients to Windows Server 2003 or Windows Storage Ser ver
2003 is similar to the b ehavior for Windows 95, Windows 98, and Windows Millennium Edition clients,
because all these clients create SMB connections. However, the non-Windows operating systems maintain
their own driver model, so these clients do not automatically get the driver during Point and Print—they
must install the driver locally. Like the Windows 95, Windows 98, and Windows Millennium clients,
these non-Windows clients do not receive driver updates from the print server after a driver is initially
downloaded. The same connection methods are available: drag and drop, the Add Printer Wizard,
referencing a UNC path, or d ouble-clicking the shared printer icon.
116
Other network file and print services