Filter
Top Products
1. Select Start > Settings > Control Pan el > Add or Remove Programs.TheAddorRemovePrograms
window is displayed.
2. Ontheleftsideofthewindow,selectAdd/Remove Windows Compone nts. The Windows
Components Wizard appears.
3. Select Other N etwork File and Print Ser vices and click the Details button. The Other Network
File and Print Services window is displayed.
4. Check the Microsoft Services for NFS s ubcomponent.
5. Click OK ,thenNext, followed by Finish.
6. After NFS is installed, you can view the details of the Microsoft Services for NFS subcomponent to see
which of i ts subcomponents were installed. The figure below s hows the subcomponents preinstalled
at the factory. Verify that the Server for NFS and User Name Mapping services have been reinstalled.
Checklists for cluster server installation
These checklists assist in preparing for installation. Step-by-step instructions begin after the checklists.
Network requirements
• Auniqu
e NetBIOS cluster nam e.
• For each node deployed in the cluster the following static IP ad dresses are required:
• One for the network adapters on the private network.
•Onefo
r the network adapters on the public network.
• One for the virtual server itself.
A sing le static cluster IP address is required for the entire cluster.
• Adoma
in user account for Cluster service (all nodes must be members of the same domain).
• Each node should have at least two network adapters—one for connection to the public network
and the other for the node-to-node private cluster network. If only one network adapter is used
for b
oth connections, the configuration is unsupported. A separate private network adapter is
requ
ired for HCL certification.
126
Cluster administration