Filter
Top Products
Introduction
15
•
•
•
•
•
•
•
Access an instrument property – We set the trigger delay to
0.01
seconds
.
•
Set the reading timeout – We set the reading timeout to
1000
milliseconds (1 second).
•
Take a reading
•
Close the instrument – This step is required when using any IVI driver,
unless the ADE explicitly does not require it. We close the session to free
resources.
Important! Close may be the most commonly missed step when using an
IVI driver. Failing to do this could mean that system resources are not
freed up and your program may behave unexpectedly on subsequent
executions.
•
Check the driver for any errors.
•
Display the reading.
Note:
Examples that use a console application do not show the display.
Now that you understand the logic behind IVI drivers, let’s see how to get started.