Filter
Top Products
Using IVI with Agilent VEE Pro
97
•
•
•
•
•
•
3 In the Edit Initialize dialog box, GPIB0::23::INSTR has already been entered
in the ResourceName field. Enter or select the following:
•
False
in the IdQuery field
•
True
in the Reset field
•
simulate=true
in the OptionString field
4 Click OK.
Configure the Instrument
1 Double-click to add another operation. The Select an Operation dialog box
appears.
2 Expand the treenode DCVoltage and select Configure. Click OK. The Edit
Configure dialog box appears.
3 To set a range of 1.5 volts and resolution of 1 millivolt, enter the following in the
Edit Configure dialog box:
•
1.5
in the Range field
•
0.001
in the Resolution field
4 Click OK.
Set the Trigger Delay
1 Double-click to add another operation. The Select an Operation dialog box
appears.
2 Expand the treenode Trigger and select Delay. Click Set. The Edit Delay dialog
box appears.
3 To set a trigger delay of 0.01 seconds, enter 0.01 in the delay field.
4 Click OK.
Set the Reading Timeout
1 Double-click to add another operation. The Select an Operation dialog box
appears.
2 Expand the treenode Measurement and select Read. Click OK. The Edit Read
dialog box appears.
3 To take a reading with a timeout of 1 second, enter 1000 in the
MaxTimeMilliseconds field.
4 Click OK. The To/From myDMM object includes an additional output node
labeled return. This will hold the value returned from the Read Measurement
operation.