Filter
Top Products
3.8 Setting Print Quality
3-67
5
To change the toner mode, press the ENTER key. A blinking question mark (
?
)
appears.
6
Press the U or V key to change to Fine.
7
Press the ENTER key to finalize the tone mode.
8
Press the MENU key. The display returns to Ready.
3.8.4 Gloss Mode
The gloss mode, when set to High, increases the effect of glossiness in printing by reducing the
printing speed by half. The gloss mode cannot be used for duplex printing. The gloss mode is
effective for the following paper types:
Plain
Recycled
Vellum
Color
Prepunched
Note
Depending on the paper used, printing in gloss mode may cause wrinkle in paper. To
reduce wrinkle,try using thicker paper.
The default gloss mode is Low. To confirm or change the gloss mode, proceed as follows:
1
Press the MENU key.
2
Press the U or V key repeatedly until Print Quality > appears.
3
Press the Z key.
>Tone
? Normal
Print Quality >