Filter
Top Products
3.6 Making Default Settings
3-48
5
If you have selected PCL 5c as the default emulation, you can change the character
code set. (Default is
IBM PC-8
.) Otherwise, press the ENTER key and go to step 6.
To change the character code set of the PCL 5c emulation mode, press the Z key. The
>Code set
submenu is displayed.
6
Press the ENTER key. Press the U or V key repeatedly until the desired character
code set appears. Press the ENTER key again to finalize setting.
7
Press the MENU key. The display returns to Ready.
3.6.2 KC-GL Pen Width and Color
The KC-GL emulation mode enables you to set the pen widths in dots, individual pen colors
for pen numbers 1 to 8, and the KC-GL page size.
1
Press the MENU key.
2
Press the U or V key repeatedly until Emulation appears on the message display.
3
If the current emulation is other than KC-GL, press the ENTER key. A blinking
question mark (?) appears.
4
Press the U or V key repeatedly until KC-GL appears.
5
Press the ENTER key.
6
Press the Z key to move to the >KC-GL Pen Adjust> submenu.
>Code Set
IBM PC-8
Emulation >
KC-GL