Filter
Top Products
3.10 Paper Handling
3-93
6
Press the ENTER key. All customized paper types, including weight and duplex
printing capability, will be reset to the default. The message display returns to
Ready
.
3.10.10 Selecting the Output Stack
The Stack Select menu on the operator panel allows you to select either the face-down tray or
the face-up tray for the output stack. If an optional output device such as the sorter, document
finisher, or bulk stacker, is installed, it can also be selected as an output stack.
1
Press the MENU key.
2
Press the U or V key repeatedly until Paper Handling > appears.
3
Press the Z key.
4
Press the U or V key repeatedly until >Stack Select appears.
5
To change the output stack, press the ENTER key. A blinking question mark (?)
appears.
6
Press the U or V key to toggle through the following output stacks:
Face-down tray
Face-up tray
The output stacks change to include the following when an optional bulk stacker or
document finisher is installed:
Face-down tray
Opt.stacker[FU] (Option face-up tray required)
Opt.stacker[FD] (Option face-down tray required)
The output stacks change to include the following when an optional sorter is installed:
Face-down tray
Paper Handling >
>Stack Select
Face-down tray
>Stack Select
? Face-down tray