HP (Hewlett-Packard) FS-8000CD Printer User Manual


 
2.3 Special Paper
2-8
2.3 Special Paper
Besides plain paper, this printer can use the following types of special paper:
Transparencies
Pre-printed
Labels
•Bond
Recycled
Vellum
Rough
Letterhead
•Color
Pre-punched
Envelope
Card stock
•Coated
Second side
Customs
Paper printed using this printer only. You cannot use paper already copied or printed by another
printer.
You can assign one of these special paper type to a paper cassette or MP (multi-purpose)
tray by using the printer’s operator panel keys. Then, the printer can automatically select the
paper cassette or malti-purpose tray to feed the special paper from and internally adjust the
electrical parameters for optimum printing performance according to the special paper type.
For details, see Chapter 3 Using the Operator Panel, section 3.10.4 Setting the Cassette
Paper Type on page 3-82.
Note that some types of special paper do not allow feeding from the paper feeder cassette or
duplex (two-sided) printing.
2.3.1 Selecting the Special Paper
Since special paper differs significantly in paper composition and quality, special paper is
more likely to cause problems than white bond paper during printing. When using special
paper, be sure that they are manufactured for photocopiers and/or laser printers.
Before purchasing any special paper, make a test print using the printer and check whether
the results are satisfactory.
Note
Kyocera Mita shall not be liable for any danger to a person or machine that is caused
by using special paper (e.g., fumes emitted from the special paper).
To avoid problems, stack transparencies, labels, or envelopes on the tray or cassette face up.
Major considerations for each type of special paper are given below.