Filter
Top Products
3.4 e-MPS
3-33
4
Press the U or V key repeatedly until
>e-MPS Configuration >
appears.
5
Press the Z key.
6
Press the U or V key repeatedly until >>Quick Copy appears.
7
Press the ENTER key. A blinking cursor (_) appears.
8
Press the U or V key to increase or decrease the value at the blinking cursor. The value
can be set between 0 and 50. Use the Z and Y keys to move the cursor right and left.
9
When the desired maximum number of jobs is set, press the ENTER key.
10
Press the MENU key. The display returns to Ready.
Maximum Space Assigned to Temporary Code Jobs
This changes the hard disk space that holds temporary code jobs. You can change the
maximum space from 0 to 9999 (megabytes). The actual maximum size depends on the size of
free hard disk space, however. The default size is 1/6 of the total hard disk space, rounded off
in unit of 50 MB. For example, if the total hard disk space is 3.2 GB, the default size is 500
MB.
1
Press the MENU key.
2
Press the U or V key repeatedly until e-MPS > appears.
>e-MPS >
Configuration
>>Quick Copy
32
>>Quick Copy
32
e-MPS >