Filter
Top Products
3.11 Color Control
3-98
5
When the desired color mode is displayed, press the ENTER key. Color mode is
changed.
6
To exit the menu selection, press the MENU key.
3.11.2 Matching Colors to Monitor (RGB Simulation)
Computer monitors use three colors of RGB (Red, Green, and Blue) to reproduce all colors. If
you wish to print data using RGB simulation for color reproduction, use the following
procedure. The printer does not use RGB simulation by default but can be set to use sRGB for
simulation.
1
Press the MENU key.
2
Press the U or V key repeatedly until Color Mode appears.
3
Press the Z key.
4
Press the U or V key repeatedly until >RGB Simulation appears.
5
Press the ENTER key. A blinking question mark (?) appears.
6
Press the U or V key repeatedly until the desired RGB type — sRGB is displayed.
7
When the desired RGB simulation mode is displayed, press the ENTER key.
8
To exit the menu selection, press the MENU key.
Color Mode >
Color
>RGB Simulation
None
>RGB Simulation
? None