Filter
Top Products
Triggering
As you begin to understand a problem in your system, you may realize
that certain conditions must occur before the problem occurs. You
can use sequential triggering to ensure that those conditions have
occurred before the analyzer recognizes its trigger and captures
information.
You set up sequential triggering as follows:
• Select the Trigger menu for the module you are using.
• In the Trigger menu, define terms and associated values to be used
when searching through the sequence.
• In the Trigger menu, select the number of the state sequence level
you want to modify, and enter the appropriate store qualification,
sequence-advance specification, and sequence-Else specification.
If you aren’t familiar with the trigger menus, try working through the
examples in the Logic Analyzer Training Kit manual, or refer to the
User’s Reference for your analyzer.
1–2