Filter
Top Products
1-10
Installing the Hub
Installing and Configuring Your Hub
Installing the Hub
You can connect up to 30 hubs together on a common ThinLAN segment. The
ThinLAN segment can include a computer attached to a hub at one end of the
segment that can communicate with a computer attached to another hub at
the other end of the segment. By using the BNC port on the module, the
maximum repeater hop-count increment through the entire segment is only
two. The following illustration shows you how to connect three hubs together
from one ThinLAN port to another.
Note Each ThinLAN cable segment must be terminated using a 50-ohm terminator
at each end. In the illustration above, a 50-ohm terminator is placed at each
end of the cable segment.
ThinLAN coax
connecting the
hubs together
Hub-16M
Hub-16U
HP AdvanceStack
10Base-T Hub-24
50-ohm
terminator
50-ohm
terminator
MUCHO.BK : ch1.fm5 Page 10 Thursday, June 26, 1997 11:37 AM