HP (Hewlett-Packard) J3188A Switch User Manual


 
D-2
Network Addressing
IPX Addressing for Novell NetWare
Network Addressing
IPX Addressing for Novell NetWare
The Novell NetWare network operating system uses a proprietary protocol
called Internetwork Packet Exchange (IPX). The IPX protocol firmware is
always available on an HP Hub-16M; it becomes active when the hub gets an
IPX address. The IPX address consists of a network number and a device
identification. The address is automatically assigned to the hub as follows (no
IPX configuration of the hub is necessary):
The network number is automatically assigned by a router or file server
on the network that is running the IPX protocol.
The device identification is the hub’s MAC address (also known as the
Ethernet address or physical address). This address is a unique 12-digit
hexadecimal number assigned to the hub at the factory.
IPX Addressing Notes:
Because the IPX address is assigned automatically, no IPX configuration is
necessary; therefore no IPX configuration is provided on the hub console
interface. By default, the hub is ready to be managed by an SNMP network
management station that is configured for IPX communications.
IP Addresses for IP and Non-IP Networks
If you have chosen to manage your hub with an SNMP/IP network manager,
your hub must be configured with an IP address. If your network will be
connected with other networks that use IP addresses, you must use assigned
IP addresses. Otherwise, you can build your own IP addressing scheme.
Globally Assigned IP Network Addresses
If you intend to connect your network to other networks that use globally
administered IP addresses, Hewlett-Packard strongly recommends that you
use IP addresses that have a network address assigned to you. There is a
formal process for assigning unique IP addresses to networks worldwide.
Contact one of the following companies:
MUCHO.BK : CD.FM5 Page 2 Thursday, June 26, 1997 11:37 AM