Filter
Top Products
C
Modem Configuration
Before installing the modems (one attached to the hub and one attached to
the terminal/PC), configure them by either issuing the appropriate AT
command or by setting the modem’s switches, as described in the tables in
the rest of this appendix.
Hayes Smartmodem Optima 28.8 (V.34)
Hayes ACCURA 288 V.34 + FAX
Hayes V-Series ULTRA Smartmodem 14400
US Robotics Courier V.FC/V.34
Megahertz XJ2288 PCMCIA card modem
At the hub end: Issue the following AT command:
A0101: AT&FQ2&C2&D3S0=1&W0 (if &C2 gives error, use &C0)
Next Rev: AT&FQ2&C1&D3S0=1&W0
At the user end: Issue the following AT command:
AT&FW1&C1&W
At the hub end: Issue the following AT command:
A0101: AT&F&C0S0=1&W0
Next Rev: AT&F&C1S0=1&W0
At the user end: Issue the following AT command:
AT&F&W
At the user end: Issue the following AT command:
AT&F\N0&W
MUCHO.BK : CC.FM5 Page 1 Thursday, June 26, 1997 11:37 AM