Filter
Top Products
A-3
Cables and Connectors
Twisted-Pair Cable/Connector Pin-Outs
Cables and Connectors
Twisted-Pair Cable/Connector Pin-Outs
Twisted-Pair Cable for Hub-to-Computer Network
Connection
To connect PCs or other network devices to the hub, use a “straight-through”
10Base-T cable. The twisted-pair wires must be twisted through the entire
length of the cable. The wiring sequence must conform to AT&T 258A (not
USOC). See “Twisted-Pair Cable Pin Assignments” at the end of this chapter
for a listing of the signals used on each pin.
Note Pins 1 and 2 must be a twisted pair.
Pins 3 and 6 must be a twisted pair.
Pins 4, 5, 7, and 8 are not used in this application, although they may be wired
in the cable.
MUCHO.BK : CA.FM5 Page 3 Thursday, June 26, 1997 11:37 AM