Filter
Top Products
Chapter 2 Controls, Ports and Indicators
11
Front Panel LED Indicators
Table 2-2. Component Indicators
LED ICON Description
Disk LED
This Disk LED has two distinctive states:
off for inactive operation
blinking Green for SCSI drive activity.
Temperature
LED
This Temperature LED has three distinctive colors:
steady Green for normal operation
blinking Red at 1 Hz blink rate for an
overheated condition inside the HP NetServer
blinking Amber at 0.5 Hz blink rate for a
warning condition.
Fan LED
This Fan LED has three distinctive colors:
steady Green for normal operation
blinking Red at 1 Hz blink rate for a non-
operational fan condition inside the NetServer
blinking Amber at 0.5 Hz blink rate for a
warning condition indicating one of the fans
may be turning too slowly.
RPS LED
This RPS (Redundant Power Supply) LED has three
distinctive colors:
steady Green for normal operation
blinking Red at 1 Hz blink rate for a bad power
supply
blinking Amber at 0.5 Hz blink rate for a
warning condition indicating a power supply
may not be working correctly.
Reserved
This LED is reserved and not used in this release.