HP (Hewlett-Packard) LC 2000 Server User Manual


 
Chapter 2 Controls, Ports, and Indicators
16
Communication Ports
The connectors on the HP NetServer’s rear panel are shown in Figure 2-6 and
described below.
Keyboard Mouse
Video NIC
(Embedded)
Serial
Management
Figure 2-6. Rear Panel Ports
Management – This connector supports the embedded Integrated Remote
Assistant and links the HP NetServer to a console for real time monitoring
and diagnosis of the NetServer's operation.
Serial A – This is the standard serial port connector.
Parallel – This is the standard parallel printer port connection.
Mouse – This connector accepts a standard PS/2 mouse.
Keyboard – This connector accepts a standard PS/2 keyboard.
NIC – This connector supports the embedded NIC (Network Interface
Card) port on the system board. This is a RJ-45 connector supporting
10/100 BaseT Ethernet.
Video – This connector provides the video signal to drive the NetServer's
monitor. Refer to "Video Support" in Appendix A for drivers and
supported resolutions.