Filter
Top Products
Chapter 2 PCI Hot Plug Utility for Novell NetWare
31
PCI Hot Plug
LED Indicators
(Amber)
Power
A
ttention
P10 P9
P8 P7
P6 P5 P4 P3 P2 P1
Figure 23. PCI Slots and LED Indicators
Table 6. PCI (Hot Plug) LED Code (Rear of Chassis)
Amber
LED
Green
LED
Slot
Status
Indicates This Status
Off On Ready
Powered on, but no driver loaded for board. Do not
remove the board from the slot.
Powered On
The PCI slot just power on, but the driver initiation is
not complete yet. This only happens momentarily prior
to completing driver loading. Do not remove the board
from the slot.
Active Power to the slot is on, and the slot is operating
normally. Do not remove the board from the slot.
On Off Powered
Off (wrong
board or no
board)
Power to the slot is off, but the Amber LED is on, due
to a failure in the Hot Replacement process. Typically
this is the result of installing the wrong board, because
the replacement board must be the same type as the
original PCI board. This also occurs if the board is
removed, emptying the slot, and power is turned on.
You can safely remove the board from this slot.
Off Off Powered Power to the slot is off. You can safely remove the