Filter
Top Products
Appendix B Warranty, Software License and Support
34
Amber
LED
Green
LED
Slot
Status
Indicates This Status
Off Off
Powered
Off
Power to the slot is off. You can safely remove the
board from this slot.
5. If not, go back to the software interface NCMCON and verify you have
turned off power to the correct slot.
6. If you are unable to power down the slot, remove and install a PCI board in
the Hot Plug slot as described in your Installation Guide.
7. Do not continue with this procedure, if you are unable to power down the
desired PCI slot.
CAUTION To prevent a system crash or hang do not open the PCI hold-
down latch, if you are unable to turn off power to the PCI slot,
using the software interface (NCMCON).
8. Press the PCI hold-down latch to release the PCI board in the slot. See
Figure 25.
A. Push here
to release
(should click).
B
.
P
u
ll
l
atc
h
to half open from rear.
Figure 25. Opening the PCI Hold-Down Latch