Filter
Top Products
Operations 24
CAUTION: Always populate each media bay with either a device or a blank. Proper airflow can
only be maintained when the bays are populated. Unpopulated drive bays can lead to improper
cooling and thermal damage.
3. Remove the media bay blank.
Remove a bezel blank
1. Power down the server (on page 20).
2. Remove the front bezel ("Open or remove the tower bezel" on page 20).
3. Remove a bezel blank.
Remove the processor board
1. Power down the server (on page 20).
2. Do one of the following:
o Open or remove the tower bezel, as needed ("Open or remove the tower bezel" on page 20).
o Extend the server from the rack (on page 21).