Filter
Top Products
Hardware options installation 51
2. Do one of the following:
o Open or remove the tower bezel, as needed ("Open or remove the tower bezel" on page 20).
o Extend the server from the rack (on page 21).
3. Remove the access panel (on page 21).
4. Remove the air baffle (on page 22).
5. Remove the fan from fan bay 1.5.
6. Install the removed fan in fan bay 2.
7. Install a fan from the option kit in fan bay 1.
8. Locate the fan 1 connector ("System board components" on page 11).
9. Remove the jumper from the fan 1 connector.
10. Connect the fan cables to the system board ("System board components" on page 11):
a. Fan 1 cable to fan 1 connector