HP (Hewlett-Packard) ML330 G6 Server User Manual


 
Setup 34
6. Slide the locking bracket forward, and then tighten the thumbscrews.
Installing the operating system
To operate properly, the server must have a supported operating system. For the latest information on
supported operating systems, refer to the HP website (http://www.hp.com/go/supportos).
Two methods are available to install an operating system on the server:
SmartStart assisted installationInsert the SmartStart CD into the CD-ROM drive and reboot the server.
Manual installationInsert the operating system CD into the CD-ROM drive and reboot the server. This
process may require you to obtain additional drivers from the HP website
(http://www.hp.com/support).
Follow the on-screen instructions to begin the installation process.
For information on using these installation paths, refer to the SmartStart installation poster in the HP ProLiant
Essentials Foundation Pack, included with the server.
Registering the server
To register the server, refer to the HP Registration website (http://register.hp.com).