Filter
Top Products
Hardware options installation 53
2. Prepare the drive for installation.
3. Install the hard drive.
4. Determine the status of the drive by observing the drive LEDs ("Hot-plug SATA or SAS hard drive LEDs"
on page 18).
5. Resume normal server operations.
Expansion hard drive cage option (hot-plug)
To install the component:
1. Power down the server (on page 20).
2. Do one of the following:
o Open or remove the tower bezel, as needed ("Open or remove the tower bezel" on page 20).
o Extend the server from the rack (on page 21).
3. Remove the access panel (on page 21).