HP (Hewlett-Packard) NX9010 Tablet Accessory User Manual


 
2-48 Removal and Replacement Service Manual
Removing the RJ11/1394 Connector Module
(Authorized Service Providers Only)
NOTE: The following RJ11/1394 connector module removal instructions apply only to
HP Pavilion ze5x00, HP nx9010 and HP nx9008, and Compaq Presario 2500 models.
Required Equipment
Small flat-blade screwdriver
Removal Procedure
1. Unplug the AC adapter, if present, and then remove the battery.
2. Remove these additional assemblies:
Hard disk drive (page 2-9)
Keyboard cover (page 2-13)
Keyboard (page 2-16)
Switchboard PCA (page 2-19)
Display assembly (page 2-23)
Top case (page 2-26)
Heat sink (page 2-40)