HP (Hewlett-Packard) P2010 Printer User Manual


 
Electrical specifications
WARNING! Power requirements are based on the country/region where the printer is sold. Do
not convert operating voltages. Doing so might damage the printer and void the product warranty.
Table C-1 HP LaserJet P2010 Series printers
Power requirements (110) 110-127v (+/-10%), 50/60 Hz (+/-2)
Power requirements (230) 220v-240v (+/-10%), 50/60 Hz (+/-2 Hz)
Power consumption
During printing (24 ppm): 410 watts (average)
During Ready (Standby)/Sleep*: 7 Watts
* Instant-on fuser technology
Off: 0 watts
Rated current
4.9 amps at 115 volts
2.9 amps at 230 volts
NOTE: Values are based on preliminary data. See www.hp.com for current information.
NOTE: The power reported is the highest value measured for monochrome printing using all
standard voltages.
NOTE: The recovery time from Ready/Sleep mode to the start of printing is less than
10 seconds because of the instant-on fusing.
NOTE: The heat dissipation in Ready mode is 25 BTU/hour.
ENWW Electrical specifications 111