Filter
Top Products
Printer connections
USB and parallel connections
1. Insert the software installation CD into the computer CD-ROM drive.
2. If the installation program does not start automatically, browse the CD contents and run the
SETUP.EXE file.
3. Follow the on-screen instructions.
NOTE: During the installation, there is a prompt to plug in the parallel or USB cable. Refer
to the figures below.
Figure 3-1 Parallel connection
Figure 3-2 USB connection
Network connections
The Network model can connect to a network through the HP internal networking port. External network
print servers are available for the non-network product model. The following list identifies what is required
to add networking to any non-network product model.
8 Chapter 3 Connectivity ENWW