HP (Hewlett-Packard) StudioJet Printer User Manual


 
48
Ioline FlexJet E User Guide
Print Cartridge Storage
Short-term Storage (7 days or less)
n Simply leave the print cartridge in the machine, capped in the
Service Station.
n If the cartridge was not in the Ser-
vice Station, it may require manual
cleaning.
Long-term Storage (greater
than 7 days)
n lace the print cartridge upside-
down in an air-tight container. Lay
a sponge or cloth dampened with
de-ionized water next to it to help
prevent the cartridge from drying
out.
n To return the cartridge to service, follow the manual cleaning
procedure above.
Updating Firmware
using the Control Center
Summary
1. Prepare the printer.
2. Check the Current Version.
3. Update the rmware.
Prepare the printer for a Firmware Update
1. Power on the PC and printer.
2. Ensure that the serial cable is connected between the PC and
the printer.
3. Copy the rmware le to the folder c:\Ioline\Firmware (or
another location that is easy to remember.)
Check the Current Firmware Version
1. Start the Control Center.
2. The main screen shows the current rmware version in the up-
per right corner.
Figure 34. Ink cartridges
should be stored in an air-
tight container.
If the rmware le is a ZIP
archive, make sure it is decom-
pressed before sending it to the
printer. You can download a ZIP
decompression utility at
http://www.winzip.com if
necessary.
Note
i