Filter
Top Products
The printer's internal prints
The internal prints give various kinds of information about your printer. They can be requested from
the front panel without using a computer.
Before requesting any internal print, check that the printer and the paper are ready for printing.
●
The print will be made on the active roll. To change the active roll, select the Paper menu icon
, then Select active roll.
●
The loaded paper should be at least A3 landscape—420 mm (16.53in) wide—otherwise the print
may be clipped.
●
The front panel should be displaying the Ready message.
To print any internal print, select the Internal Prints menu icon
, then select the internal print you
want. The following internal prints are available.
●
Demo prints: show some of the capabilities of the printer
◦
Print drawing demo
◦
Print rendering demo
◦
Print GIS map
●
Menu map: shows details of all the front-panel display menus
●
Configuration: shows all the current front-panel display settings
●
Usage report: shows estimates of the total number of prints, number of prints by paper type,
number of prints by print-quality option and total amount of ink used per color (the accuracy of
these estimates is not guaranteed) (T770 HD and T1200 series only)
●
HP-GL/2 palette: shows the color or grayscale definitions in the currently selected color palette
●
Service information: provides information needed by service engineers
●
PostScript font list: shows PostScript fonts available (PostScript printers only)
10 Chapter 1 Introduction ENWW
Introduction