Filter
Top Products
2. Select Paper load.
3. Select the roll that you want to load.
If the roll you have selected is already loaded, you have to wait while it is automatically
unloaded.
4. In the T1200 series only, if you start to load roll 1 while roll 2 is already loaded, roll 2 is
withdrawn to the standby position, so that it can be printed on again without reloading whenever
required.
NOTE: If at any time you open a roll cover while that roll is in the standby position, the roll will
be automatically unloaded, and you will have to reload it the next time you want to print on it.
5. Open the roll cover, if it is not already open.
6. You should stand behind the printer when loading the T1200's lower roll (roll 2). You may stand
behind or in front of the printer when loading the upper roll (roll 1), or when loading a roll into the
T770.
CAUTION: If your height is less than 1.6 m (5 ft 3 in), loading a roll while standing in front of
the printer may cause back pain or other physical problems.
7. Rest the spindle's black end on the left side roll holder. Do not put the end completely into the
roll holder.
ENWW Load a roll into the printer 35
Paper handling