Filter
Top Products
107
Chapter 4, Making Measurements
How to Read Data and Make Measurements
Making Measurements
Making changes to
the Measurements
display
In the Connect state, when Meas is selected for the first time, the default screen
displays the EVM1 measurements. When making measurements on a digital
traffic channel, there are four default selections for the EVM1 measurements:
• Frequency Error
• TX Power
•EVM
• Peak EVM
Figure 31 Default Measurement Selections
The Meas display for EVM 1 and EVM 10 can be configured to display different
measurements. If it has already been modified, the last modified display will
appear instead of the default. The displays for Adjacent Channel Power, Average
Power, and MAHO are fixed.
CALL PROCESSING
DURING MEAS
MODE
If you select any of the call processing functions (
Active, Register, Page,
Handoff, Release
) while in the Meas mode, the display will automatically change
back to the Data
mode.
Default measurement
selections
Cm-meas.tif