Filter
Top Products
88
S:\HP83206A\USRGUIDE\MANUAL\cpmeas.fm
Chapter 3, Processing Calls
Orders
Orders
Note that the available choices in the Order field are valid choices for the current
channel only. See “Program Example” on page 149 for an example of the program
command. (See also “Which Control Order Command Should I Use?” in the HP
8920B Option 801 Condensed Programming Reference.)
1. Verify that the Test Set is in the Connect state. (See “Page” on page 91)
2. Select the
Order
field on the left side of the screen.
3. Select the desired order from the list of Orders.
4. The Access annunciator will light briefly while the Test Set sends the order to the
mobile.
5. When the mobile has acknowledged the order, the screen will display the
acknowledgment.
Figure 21 CALL CONTROL Screen with an Order Response Displayed
This is a typical
acknowledgment
for the Change Power
Level 1 order.
The new
power level
is displayed here.
pwrlvlch.tif