Filter
Top Products
224
S:\HP83206A\USRGUIDE\MANUAL\ref.fm
Chapter 7, Screen and Field Descriptions
Parameters of the DCCH CALL CONFIGURE Screen
Sat Tol Settings: Narrow or Wide
Units: None
This sets the allowed frequency error for the mobile’s supervisory audio tone
(SAT) when connecting to an AVC. The
Wide setting can be beneficial when
processing a call where a large amount of noise is present with the SAT tone.
•
Narrow
- requires the sat tone to be within
±
10 Hz of the frequency specified in the
CALL CONTROL screen
SAT
field when connected on an AVC.
•
Wide
- accepts a sat tone in the range of 0 Hz to 7 kHz.
SMS Contents Settings: Up to 96 characters.
Units: None
This allows you to enter a custom Short Message Services (SMS) message to
transmit to the mobile. The message is sent when
Send SMS is selected from the
CALL CONTROL screen’s
Order or Cntl Order field. The number of
characters that are transmitted is determined by the
SMS Size field.
SMS Msg Settings: 243 factory-defined characters.
Units: None
A 243-character message is automatically placed in this field when the SMS Type
is set to Auto. You can edit the first 96 characters if desired, but the remaining
characters cannot be changed or viewed.
The message is sent when
Send SMS is selected from the CALL CONTROL
screen’s
Order or Cntl Order field. The number of characters that are
transmitted is determined by the
SMS Size field.
SMS Size Settings: 1 through 243.
Units: characters (implied)
This setting defines the number of characters in the
SMS Contents field that are
used when an SMS message is sent. The factory-defined character string “Auto”
uses the full 243 characters allowed.