HP (Hewlett-Packard) TIA/EIA-136 Network Card User Manual


 
217
Chapter 7, Screen and Field Descriptions
Parameters of the CALL CONTROL Screen
Screen and Field Descriptions
Release Settings: This is an immediate action field. Selecting it starts the action.
Units: None.
Release is a command. This command instructs the Test Set to release the call in
progress.
Figure 69 The Release Command Display (CALL CONTROL Screen)
SAT Settings: 5970, 6000, 6030
Units: Hz.
This is the Supervisory Audio Tone. Used with AVC only.
SID Settings: 1 through 32767
Units: None, Decimal or hexadecimal values.
This is the System Identification of the system which the Test Set is emulating.
Release
Command
cm-meas.tif