198
S:\HP83206A\USRGUIDE\MANUAL\hpib.fm
Chapter 6, HP-IB Syntax Diagrams
SERV
SERV
The following commands are used to query some of the service latches in the test
set. Not all of the latch commands are shown.
Querying the
Timebase
Out-of-Lock
Indicator
Issue the :LATCH:SEL command first, specifying the reference sense latch as
shown above. Then use the :LATCH:VAL? query to see the status of the out-of-
lock indicator. 0=locked, 1=out-of-lock.
Checking if
Temperature
Compensation is
Necessary