Filter
Top Products
223
Chapter 7, Screen and Field Descriptions
Parameters of the DCCH CALL CONFIGURE Screen
Screen and Field Descriptions
Public Sys Settings: On or Off
Units: None
This enables or disables the Non-Public System operation. It is used in
conjunction with the
# Systems, MCC, PSID/RSID, and SOC fields.
RF Path Settings: Bypass or IQ
Units: None
This switches the RF Generator’s IQ modulator in or out of the generator’s path.
This function is normally switched automatically, depending on the System Type
and/or Cntrl Chan selected. The Bypass setting is used for creating analog signals,
such as standard AMPS voice channels. This field overrides the automatic setting
if necessary (such as when you want to calibrate TX Power with an analog signal
while displaying the DIGITAL MEASUREMENTS screen).
Reg Conf Settings: On or Off
Units: None
The Registration Confirmation field is used when sending a registration command
to the mobile. When set to
On, this field causes the Test System to automatically
send a confirmation message to the mobile after the Test System correctly
receives the registration information from the mobile.