Filter
Top Products
9
Power
The terminal requires 9.5 Volts DC input for
communications and battery charging; the power adapter
on the power cable converts the voltage from the power
source to 9.5 volts DC. Only the Honeywell 9.5 VDC, 4A
power supply provided with the ebase converts the
voltage appropriately.
Honeywell recommends that you leave the eBase
connected to its power source at all times, so that it is
always ready to use.
We recommend use of Honeywell peripherals, power
cables, and power adapters. Use of any non-Honeywell
peripherals, cables, or power adapters may cause
damage not covered by the warranty.
1. Plug the A/C power cord into the power adapter.
2. Plug the power cable into the power connector on the
back of the eBase.
3. Plug the A/C power cord into a standard wall outlet.
The ebase is now powered. The COMM LED on the
eBase flashes red.
!
Power Cable
A/C Power Cord
Power
Adapter