Filter
Top Products
16
Configuring the Network
By default, the eBase is configured to obtain IP addresses
automatically via DHCP server. This means that in most
cases you would simply plug-and-play the unit. If
necessary, you can use the Cradle Manager configuration
utility for dynamic network configuration.
Accessing the eBase Cradle Manager from a Host
Workstation
1. Connect the host workstation Ethernet cable to a port
on the same
Ethernet subnet as the eBase. If the eBase is
connected to a hub (or router), connect the host
workstation to an available port on the same hub.
2. On your host workstation, open the web browser.
3. In the Address line, type the IP address assigned to
the eBase, see Displaying the eBase and Terminal IP
Address on page 14. Press
ENTER
.
4. A login prompt displays on the host workstation.
Enter the user name <
Admin>
and default login
password <Dolphin>.
Note: The user name and password are case-sensitive. For
information on how to change the password, see page 18.